ADTRAN NetVanta 4305
NetVanta 4305 Chassis
The NetVanta 4305 is an access router designed for
cost-effective Internet access, corporate Frame Relay, point-to-point
connectivity, and Virtual Private Networking (VPN) for large-bandwidth
applications supporting up to eight T1s worth of performance. Residing in a 1U
high, 19" rackmountable metal enclosure, the NetVanta 4305 is a single platform
that offers three interface slots and two 10/100Base-T Ethernet LAN ports for
true LAN segmentation or DMZ applications. Initially, the NetVanta 4305 will
house a variety of Network Interface Modules (NIMs) and includes a Stateful
Inspection Firewall, QoS for delay-sensitive traffic like VoIP, NAT and DHCP,
and all managed with a familiar Command Line Interface (CLI).
- Three-slot,
dual-Ethernet IP access router for Frame Relay, PPP, PPPoE, and Multilink
PPP networks
- Dual auto-sensing
10/100Base-T interfaces support LAN segmentation or DMZ applications
- Interchangeable
Network Interface Modules (NIMs): 56/64K, T1/FT1, T1/FT1 with DSX-1, Dual
T1, E1/FE1, E1/FE1 with G.703, ADSL, Serial, and an Octal T1/E1 Wide Module.
- Based on
feature-rich ADTRAN Operating System (OS)
- Standards-based
BGP, OSPF, RIP, static routing, and bridging protocols
- Integral stateful
inspection firewall protects against Denial of Service (DoS) attacks
- QoS using Low
Latency and Weighted Fair Queuing
- DiffServ marking
or packet recognition
- Frame Relay
Fragmentation to avoid latency
- Easily
recognizable Command Line Interface (CLI)
- 802.1Q VLAN
trunking and inter-VLAN routing
- Network Address
Translation (NAT/NAPT) for IP concealment
- NAT-compliant SIP
ALG
- DHCP client,
server, and relay for IP address assignment
- XAUTH including
RADIUS and RSA SecurID for user administration
- Optional IPSec
VPN upgrade supporting 1,000 tunnels and DES/3DES/AES encryption
- Compatible with
ADTRAN's VPN-equipped NetVanta models and other IPSec-compliant appliances
- 1U, 19-inch
rackmount metal enclosure
- 1.75” H, 17.25”
W, 11" D
- Auto-ranging
power (100-250 VAC, 50/60 Hz, 325 watts)
An Export License is required if the ADTRAN
NetVanta 2400, NetVanta 4305, and NetVanta 5305 products are sold to a
Government Entity outside of the EU+8 (Austria, Australia, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy,
Japan, Luxembourg, Netherlands, New Zealand, Norway, Poland, Portugal, Spain,
Sweden, Switzerland, and the United Kingdom). This is per DOC/BIS ruling G030477
issued June 6, 2003.
|
4200890E2 |
4305 Chassis w/ Enhanced Feature Pack |
$3290 |
|
|
4200893E1 |
4305 w/ Octal T1/EI Wide Module |
$3790 |
|
Important Note:
* Free Configuration and setup is only available in
our immediate service area (Salem County, NJ).
Outside our immediate service area, there will be a charge.
|
